RC Model Boats

Canadian One Design
The Canadian One Design racing mono hull was one of the most popular racing boats in Canada. Designed in the 1950, it's simple build and low cost attracted the average working person onto the racing scene. By the mid 1960's the class had died out.
1/8 scale.. length 22" .. beam 9" ... 3lbs ready to run

Requires
7.2volt stick pack
.05 size motor
speed controller
2 channel FM radio
O.M.K. drive kit
$125.00 Canadian dollars

1/16 scale Canadian One Design
Same construction as the 1/8 scale version but in 1/16th scale. This all wood model  makes for a great pool racer and with a 1050ma LI-PO battery, run times can reach 30-40 minutes. Kit includes: a 280 size motor and drive hardware. length 11" .. beam 4.5"  9oz ready to run

Requires
7.4volt LI-PO battery
Speed controller

Micro servo
2 channel FM radio

$75.00

Miss Supertest III
3 time Harmsworth trophy winner 1959, 60, 61
1/12 scale all plywood construction with vacuumed formed cowl and engine. Authentic scale decals and detailed Rolls Royce Griffin engine.
Designed to run on a 700 size motor or brushless setup. Very competitive in the L S H class. Requires a two channel radio, speed controller, battery packs and drive hardware scale or surface drive.
Length 31”
Width 12.5”
3.5lbs ready to run
$215.99 Canadian dollars

Miss Supertest III
A 1/24 scale static display of the famous Harmsworth trophy winner. All plywood construction with vacuumed formed cowl and engine and authentic scale decals.
Length 15”
Width 6.25”
$59.99 Canadian dollars

Drive Kit available

Utility runabout
The Utility Runabout is a 1/12 scale model of a typical classic mahogany runabout. This type of boat was used on lakes all over North America. Requires two channel radio, battery pack and speed controller. Kit includes a 280 size motor and running hardware.
Length 16”
Beam 5.5”
1.25lbs ready to run
$139.99 Canadian dollars

Gentlemen’s Racer
A traditional 1/12 scale Gentlemen’s Racing runabout.
Based on the lines of the classic Garwood speedster.
Requires two channel radio, battery pack and speed controller. Kit includes a 280 size motor and running hardware.
Length 16”
Beam 5.5”
1.25lbs ready to run
$139.99 Canadian dollars

Miss Canada III
A 1938 stepped hydroplane driven by Harold Wilson
And design by Douglas van Patten for Gold Cup Racing.
Built of plywood with mahogany deck and vacuumed formed parts. Designed to run on a 05 to 700 size motor.
Requires two channel radio, speed controller, battery packs and scale or surface drive hardware.
1/12 Scale
Length 25.5”
Beam 7”
2.5-3lbs ready to run
$209.99 Canadian dollars

Miss Canada III
A 1/24 scale static display model of the sleek stepped hydro.
Length 12.25”
Beam 3.5”
$59.99 Canadian dollars

Miss Canada III
A 1/6 scale version design to run on a 700 or larger size motor. Requires two channel radio, speed controller, battery packs and scale or surface drive hardware.
Length 52”
Beam 14”
5lbs ready to run
$449.99 Canadian dollars

Mirror Dinghy
The famous little sailboat that has sold over 80,000 kits world wide can now be yours as a 1/6 scale R/C model. The kit is put together the same way as the real boat. With minor changes it will also make a great static display model. Requires two channel radio
Length 22”
Beam 9”
Mast height 32”
2.5lbs ready to run
$174.99 Canadian dollars

A beautifully crafted 1/10 scale radio controlled model kit of Art Ashbury’s famous 266 class hydroplane. The model is made of 1/8” plywood frames and 1/32” plywood decking
And also features a vacuumed cowl.
Design to run on a .05 or brushless motor system. Requires a 2 channel radio, speed controller, 6 cell battery pack, scale or surface drive hardware
Length 25”
Beam 11”
Weight 3lbs ready to run
$125.00 Canadian dollars
*Vinyl decal kit is not includes but maybe ordered separately. Please see accessories page

The International Mirror Dinghy is now
available as a 1/12 scale static display kit
The model retains many of the features of the full size boat
The kit includes: Laser cut parts
Detailed instructions
Realistic sails
Rigging hardware
Display stand
Length 11”
Beam 4.75”
Mast Height 16”
$59.99 Canadian dollars

Vintage Hydroplane cowl
Vacuumed formed 1/12 or 1/10 scale
Vintage hydroplane cowl kit includes
Fin, steering wheel, dashboard, windshield
Seat
$19.99 Canadian dollars